Konsond designs and manufactures new tools on Customer specifications

Konsond designs and manufactures new tools on Customer specifications.We also do ODM & OEM products.

Proper sharpening is critical to tool performance and it must restore all the parameters established in the design phase. Normally, the tools to be sharpened show:

Worn teeth

It is advisable to perform the sharpening when the teeth aren't too worn yet: insisting on using the tools with worn teeth, only leads to a dramatic decline in the yield and quality of the product. In addition, with a worn tool the chipping are increasing also on materials of good quality.

Circular saw blades Universal Materials circular saw blades are mainly used for cutting low hardness carbon steel, non-ferrous metal bars and pipes. Ultra-hard material pipe cutting saw blades are used for milling of difficult-to - machined materials (heat resistant iron, high hardness stainless steel).

1.the circular saw blade: is used for cutting the floorboard of the Circular sheet cutting tools of solid materials, can be divided into: stone cutting of diamond circular saw blade, metal material cutting with HSS circular saw blade (not carbide tipped) of the cutting tools, carbide saw blades, truthfully, man-made board, wood, furniture, aluminum alloy, aluminum, radiator, plastic, model steel, etc.

2.Alloy saw blade (also called cemented carbide saw blade) is a circular saw blade with several teeth on the round sheet (matrix). The teeth are embedded with cemented carbide blade. It is mounted on the rotating spindle through the middle hole in the center of the matrix and clamped with splint to rotate and cut.

3. Carbide saw blades: according to the use occasions can be divided into the circular saw blades used on hand tools and the professional circular saw blades used on mechanical equipment (table saw, push table saw, precision saw, woodworking machinery, etc.).The precision of professional circular saw blades is generally higher than that used on power tools.The price is also very high

4. Aluminum alloy saw blade (also known as cutting aluminum saw blade), mainly used for cutting non-ferrous metals, such as aluminium alloy profiles, aluminium profiles, aluminium bars, aluminium radiators and other non-ferrous metals are difficult to process materials, so there are special requirements for sawing performance and precision, need to be targeted design and manufacturing.

HSS SAW BLADE

Material    Cutting Speed（m/Min)    Feed per tooth(mm)

C10,C15,St34,St37,  low-carbon steel<500N/mm&sup2;

30~50    0.03~0.05

38NCD4,50CrV4,14NiCr14,high carbon steel<1200N/mm&sup2;    15~25    0.02~0.03

Stainless steel    10~30    0.01~0.03

Cast iron    30~50    0.04~0.05

Aluminium or aluminium alloy (bar)    600~900    0.04~0.09

Aluminium or aluminium alloy (section)    1000~1600    0.03~0.07

Bronze or copper    200~300    0.04~0.06

brass    400~600    0.04~0.08

synthetic materials    60~150    0.04~0.08

remarks：        
1、 To optimize the sawing effect, the rotation speed and feeding speed should be controlled.

2、The table above is based on experience, recommending the best speeds for sawing materials.

3、To determine the most suitable speed, the following formula can be used to calculate (V= linear speed, D= diameter of saw blade) :RPM=V*1000/（D*3.14)